+- AutoProfessionals (https://www.autoprofessionals.org)
+-- Forum: Auto-Professionals Cars Forums (https://www.autoprofessionals.org/forumdisplay.php?fid=9)
+--- Forum: Car Automotive Software - Automotive Workshop Manuals - Catalogue - General - Others (https://www.autoprofessionals.org/forumdisplay.php?fid=43)
+---- Forum: Mercedes Benz - Smart (https://www.autoprofessionals.org/forumdisplay.php?fid=62)
+---- Thread: DTS Monaco 8.16.15 SETUP + Full Keygen + Patch (/showthread.php?tid=9765)
Pages:
1
2
DTS Monaco 8.16.15 SETUP + Full Keygen + Patch - culbaru - 28-04-2020
DTS Monaco 8.16.15 SETUP + Full Keygen + Patch
Enjoy!
RE: DTS Monaco 8.16.15 SETUP + Full Keygen + Patch - Pingpong - 27-05-2020
Just to add, this all works !
I was trying DTS 8.14 & maybe the setup files were a mess... who knows...
Anyway, 8.16 installed NO ISSUES, keygen works a treat. I've not got much knowledge about DTS, however so far...
- My SD connect C4 clone talks fine to DTS
- I can connect to my W212 car & do a basic check of parameters etc...
- DTS shows up license files in OTX studio.
- Config tool shows SN of my MUX ( only weird bit is that on interface "drop down" it shows no licensed hardware.. ) but MUX still talks...
Good work bud & thanks for the share..
I just need to add some data files etc & learn about DTS...
Makes Vediamo look easy & I'm not that good on it.. still have much to learn about that one....
BTW, I did a fresh install on a separate HDD, NO DAS / Xentry etc.... ( but you have to edit toolkit.ini on DTS, in the I+Me actia subfolder, as it'll change language on MUX to german lol ! ).
BR
RE: DTS Monaco 8.16.15 SETUP + Full Keygen + Patch - lfas - 27-05-2020
(28-04-2020, 19:00)culbaru Wrote: DTS Monaco 8.16.15 SETUP + Full Keygen + Patch
Enjoy!
hi bro , we can use it for coding without License ??
and if can you share the License ?
Regards
RE: DTS Monaco 8.16.15 SETUP + Full Keygen + Patch - Pingpong - 28-05-2020
Everything is in the download links bud...license etc and the KG.
The KG was a bit trial and error as it's in Chinese or Japanese text....
But it works....only bit on the config manager is the "no licensed Hardware found" error...which may be mux settings ??
Just need to populate DTS with data... As it shows up ECUs with ???? However the basic parameters like rpm, temp etc are all displayed.
I think this will take a lot of learning for me to understand this S/W
BR
I had to change ipv4 to do the IP address....
BR
RE: DTS Monaco 8.16.15 SETUP + Full Keygen + Patch - lfas - 29-05-2020
(28-05-2020, 07:40)Pingpong Wrote: Everything is in the download links bud...license etc and the KG.
The KG was a bit trial and error as it's in Chinese or Japanese text....
But it works....only bit on the config manager is the "no licensed Hardware found" error...which may be mux settings ??
Just need to populate DTS with data... As it shows up ECUs with ???? However the basic parameters like rpm, temp etc are all displayed.
I think this will take a lot of learning for me to understand this S/W
BR
I had to change ipv4 to do the IP address....
BR
sorry bro , but there is no license on your shared files , or did is not the same license like DTS 8.14 ( License.bin ) ?
did it's a file on the patch or something ?
Thank you very much and Best Regards
RE: DTS Monaco 8.16.15 SETUP + Full Keygen + Patch - Pingpong - 30-05-2020
Soz mate this as is culbarus work...
Deffo a license.bin file... In one of the program data folders.
I even went in and did a manual update and it accepted the license again under the config menu.
Only bit is licence for mux...think it's settings...but otx studio shows all licenses in green and nothing is greyed out...
Install 1st, then use kg, it installed with no errors.
BR.
RE: DTS Monaco 8.16.15 SETUP + Full Keygen + Patch - lfas - 31-05-2020
(30-05-2020, 18:37)Pingpong Wrote: Soz mate this as is culbarus work...
Deffo a license.bin file... In one of the program data folders.
I even went in and did a manual update and it accepted the license again under the config menu.
Only bit is licence for mux...think it's settings...but otx studio shows all licenses in green and nothing is greyed out...
Install 1st, then use kg, it installed with no errors.
BR.
yes bro , you are right , i have check OTX studio and all is green but what about this capture :
is not like the previous version 8.14 , can explain for me please ??
Best Regards
![[Image: 20060101415725315416826058.png]](https://www.casimages.com/i/20060101415725315416826058.png.html)
RE: DTS Monaco 8.16.15 SETUP + Full Keygen + Patch - Pingpong - 01-06-2020
Hi bud, that is exactly what I have, so I am stumped at the moment.... Yet everything else works ??? We need culbaru to answer or someone else perhaps ??
Very odd as it accepts license.bin file if you use the manual update license menu.
BR
RE: DTS Monaco 8.16.15 SETUP + Full Keygen + Patch - Pingpong - 02-06-2020
Update...it looks like a config parameter in config setup... You have to setup ecom_smr as SD connect...
Once it's refreshed, licensed Hardware shows up with mux serial number...
Of course, you must have mux connected to laptop for this....
Just waiting for a fellow member to try and see if this their conclusion.
BR.
RE: DTS Monaco 8.16.15 SETUP + Full Keygen + Patch - Ivymike - 06-07-2020
Is it normal Monaco have parts written in Chinese after patch?