17-01-2018, 16:36
TrueEU PCB 1:1 As Original
KTAG 2.23 7.020
ALL PROTOCOLS OPEN
CARS BIKES BOATS TRUCKS TRACTORS TRICORE
NO TOKENS
ALL CABLES + HELP FILES
INTERNET SAFE
*******************************
FAQ:
1.Q: Why does this KTAG cost more than any other unit on the internet?
A: We sell two types of units. This particular unit is called TrueEU. This unit from scratch is manufactured with a exact duplicate PCB as the original KTAG. All components are of equal or higher quality than the original. This unit will function exactly as the original without any issues or failure. Our other unit is called Fully Reworked, these units start as china unit, they are then disassembled and ALL COMPONENTS THAT ARE PRONE to FAILURE are REPLACED. We also sell these units on eBay, for around half the price as our TrueEU units. Please see our other listings.
2.Q: Where is this unit manufactured?
A: Our unit is manufactured and tested in the EU. It goes through the strictest quality assurance testing before each unit is shipped. Our TrueEU units have and will NEVER have anything CHINA ABOUT THEM!!!
3.Q: Does BMWFXX work with this unit?
A: Yes you can make BMW Fxx series ecus without any problem. Even if the ecus have new GPT micro protection this is no problem either for our unit.
4.Q: Can I make GPT new ecus with this KTAG? Do you include GPT cable with this KTAG?
A: Yes you can make all of the latest GPT ecus with our unit. We also now include the additional GPT cable with our kit.
5.Q: Is KTAG Master or Slave?
A: Master Version
6.Q: Can KTAG update?
A: If an update is released you can purchase new NXP + SDCARD to update. This KTAG TrueEU PCB uses a socketed board so in the event we release an upgrade you can just pop the old NXP off and pop a new one on, you would also need to swap out the sdcard that is onboard. This unit is built to allow the user to make update themselves without having to do any soldering or send the unit back for an upgrade. These units CANNOT be updated online
7.Q:Does KTAG need to be activated?
A:No it does not have to be activated
8.Q: What operating system can KTAG be installed on?
A: Our software is custom made and has drivers for ALL VERSIONS of WINDOWS, WINDOWS XP, 7, 8.1, and 10. You must install this software AS ADMINISTRATOR
9.Q: KTAG is showing the error “Connections not established” ?
A: Either you have a bad USB cable, you can check this via the device manager in windows. If the usb cable is good, but you do not see KTAG in device manager please reinstall as administrator.
10.Q: After Ksuite opens all of the icons are greyed out? What is the problem?
A: Please disconnect network connection and restart ksuite. All protocols should be OK now. This happens sometimes if you have a specific firewall rule enabled on your laptop or router.
11.Q: Can my KTAG work with EDC17
A: Yes, Our TrueEU KTAG can work with EVERY PROTOCOL that is available inside ksuite, EDC17 included.
12.Q: Can my KTAG make correct checksum?
A: Checksum is automatically corrected as you are performing a write
13.Q: Sometimes KTAG help file is referencing an adapter? Do I need and do you sell these adapters?
A: Adapters exist to make a user who doesn't enjoy soldering, or wants to get the job done faster/easier. All ecus can be made with the provided cables, however, if you would like to make your life easier we do sell BDM Frames and Adaptors. We sell adaptors both individually and in sets. We also sell BDM tables, if you would prefer to use boot pins instead of adaptors.
KTAG 2.23 7.020
ALL PROTOCOLS OPEN
CARS BIKES BOATS TRUCKS TRACTORS TRICORE
NO TOKENS
ALL CABLES + HELP FILES
INTERNET SAFE
*******************************
FAQ:
1.Q: Why does this KTAG cost more than any other unit on the internet?
A: We sell two types of units. This particular unit is called TrueEU. This unit from scratch is manufactured with a exact duplicate PCB as the original KTAG. All components are of equal or higher quality than the original. This unit will function exactly as the original without any issues or failure. Our other unit is called Fully Reworked, these units start as china unit, they are then disassembled and ALL COMPONENTS THAT ARE PRONE to FAILURE are REPLACED. We also sell these units on eBay, for around half the price as our TrueEU units. Please see our other listings.
2.Q: Where is this unit manufactured?
A: Our unit is manufactured and tested in the EU. It goes through the strictest quality assurance testing before each unit is shipped. Our TrueEU units have and will NEVER have anything CHINA ABOUT THEM!!!
3.Q: Does BMWFXX work with this unit?
A: Yes you can make BMW Fxx series ecus without any problem. Even if the ecus have new GPT micro protection this is no problem either for our unit.
4.Q: Can I make GPT new ecus with this KTAG? Do you include GPT cable with this KTAG?
A: Yes you can make all of the latest GPT ecus with our unit. We also now include the additional GPT cable with our kit.
5.Q: Is KTAG Master or Slave?
A: Master Version
6.Q: Can KTAG update?
A: If an update is released you can purchase new NXP + SDCARD to update. This KTAG TrueEU PCB uses a socketed board so in the event we release an upgrade you can just pop the old NXP off and pop a new one on, you would also need to swap out the sdcard that is onboard. This unit is built to allow the user to make update themselves without having to do any soldering or send the unit back for an upgrade. These units CANNOT be updated online
7.Q:Does KTAG need to be activated?
A:No it does not have to be activated
8.Q: What operating system can KTAG be installed on?
A: Our software is custom made and has drivers for ALL VERSIONS of WINDOWS, WINDOWS XP, 7, 8.1, and 10. You must install this software AS ADMINISTRATOR
9.Q: KTAG is showing the error “Connections not established” ?
A: Either you have a bad USB cable, you can check this via the device manager in windows. If the usb cable is good, but you do not see KTAG in device manager please reinstall as administrator.
10.Q: After Ksuite opens all of the icons are greyed out? What is the problem?
A: Please disconnect network connection and restart ksuite. All protocols should be OK now. This happens sometimes if you have a specific firewall rule enabled on your laptop or router.
11.Q: Can my KTAG work with EDC17
A: Yes, Our TrueEU KTAG can work with EVERY PROTOCOL that is available inside ksuite, EDC17 included.
12.Q: Can my KTAG make correct checksum?
A: Checksum is automatically corrected as you are performing a write
13.Q: Sometimes KTAG help file is referencing an adapter? Do I need and do you sell these adapters?
A: Adapters exist to make a user who doesn't enjoy soldering, or wants to get the job done faster/easier. All ecus can be made with the provided cables, however, if you would like to make your life easier we do sell BDM Frames and Adaptors. We sell adaptors both individually and in sets. We also sell BDM tables, if you would prefer to use boot pins instead of adaptors.