Problem with CGW update

[logix76]

My car is w211 200cdi 2008. I wanted to update the CGW central gate control module (or ZGW) via Xentry passthru Openport 2.0 Offline. I used the SdFlash 2014 archive and the files that were automatically selected by xentry had the same number as the existing file, but with the _001 extension. the update process went normally and then i wanted to do the variant coding but the most important thing i noticed was that i could not select Land (DE) Germany. has the rest of the world, Japan, USA; Schweiz, etc., but not Germany. I tried to code the main wires like Gearbox, Sunroof, etc. but again I felt something was wrong with the car. it seemed like Auto was slow, low reaction from shortness of breath and many errors like AHK, tire pressure sensor. I think that the original file 
I was desperate because i had no experience and asked for help here to the W211 Administrator and he offered me his precious help. After he did the proper variant coding, car stabilized, the errors were deleted, only AHK causes minor errors in KL Block and RearSAM maybe because it is not original, it is retrofitted. Anyway i want to thank again the Admin W211 for his unconditioned help
i learned a good lesson after all, if something works ok you don't have to play with it especially with ECUs.

[kingauto]

My car is w211 200cdi 2008. I wanted to update the CWG central gate control module (or ZWG) via Xentry passthru Openport 2.0 Offline. I used the SdFlash 2014 archive and the files that were automatically selected by xentry had the same number as the existing file, but with the _001 extension. the update process went normally and then i wanted to do the variant coding but the most important thing i noticed was that i could not select Land (DE) Germany. has the rest of the world, Japan, USA; Schweiz, etc., but not Germany. I tried to code the main wires like Gearbox, Sunroof, etc. but again I felt something was wrong with the car. it seemed like Auto was slow, low reaction from shortness of breath and many errors like AHK, tire pressure sensor. I think that the original file 
I was desperate because i had no experience and asked for help here to the W211 Administrator and he offered me his precious help. After he did the proper variant coding, car stabilized, the errors were deleted, only AHK causes minor errors in KL Block and RearSAM maybe because it is not original, it is retrofitted. Anyway i want to thank again the Admin W211 for his unconditioned help
i learned a good lesson after all, if something works ok you don't have to play with it especially with ECUs.

yes,w211 is a professional,i recommend him too