AutoProfessionals
Xentry OpenShell 03.2025 HHT (+C3) WIS EPC Vediamo Monaco (Acronis L+UEFI) - Printable Version

+- AutoProfessionals (https://www.autoprofessionals.org)
+-- Forum: Auto-Professionals Cars Forums (https://www.autoprofessionals.org/forumdisplay.php?fid=9)
+--- Forum: Car Automotive Software - Automotive Workshop Manuals - Catalogue - General - Others (https://www.autoprofessionals.org/forumdisplay.php?fid=43)
+---- Forum: Mercedes Benz - Smart (https://www.autoprofessionals.org/forumdisplay.php?fid=62)
+---- Thread: Xentry OpenShell 03.2025 HHT (+C3) WIS EPC Vediamo Monaco (Acronis L+UEFI) (/showthread.php?tid=9352)

Pages: 1 2 3 4 5 6 7

Xentry OpenShell 03.2025 HHT (+C3) WIS EPC Vediamo Monaco (Acronis L+UEFI) - Aleksey-MS - 26-12-2019

Xenty Cars OpenShell 03.2025 (terabox) + All OpenShell 09.2023 (torrent) HHT (+C3) DAS WIS EPC STARFINDER VEDIAMO MONACO (Acronis L+UEFI)

Computer requirements:
  • HDD or SDD 480 Gb
  • RAM 4 Gb
  • Processor with support for virtualization technology (enable virtualization in BIOS).
VHD image with Windows 10 LTSC x64 Rus (by default) + English.

This version is a revision and modification of the 03.2023 image, it is fully configured for offline, all offline patches are applied and additional ones are activated. functions for DAS. A patch for Xentry Offline login has been applied. XUS 6.8.0.0 configured and activated! The data map in WIS and EPC has been configured, shortcuts for direct launch are also made, and the transition from Xentry and DAS to WIS is activated (WIS must already be launched before starting Xentry or DAS).

Why VHD and not Acronis? - VHD is a more universal format, you can immediately boot from it without expanding the image by making a couple of clicks in the Easy BCD program. Can be connected to virtual machines. You can deploy it as an acronym or other programs to disk (it is recommended to use VHD2DISK). In two clicks it is mounted in the system and you can take any information from there. Added Strelec WINPE and Rufus to create a bootable USB flash drive for image recovery.

Programs in the image:
  • Xentry OpenShell 09.2023
  • DAS SCN offline coding (SDFlash 07.2018)
  • Xentry OpenShell 09.2014 (virtual machine for SD Connect С3 and direct connections to ECU from DAS to HHTwin)
  • Xentry Update Service 6.9.0.0
  • Vediamo 05.01.01 + configured for С6, Xentry VCI, VCX SE
  • DTS Monaco v8.14.016 + projects 2022 (8.16.015 with my activation) + configure for С6, Xentry VCI, VCX SE
  • EPC 11.2018
  • WIS 10.2020
  • WIS standalone 2021/07
  • StarFinder 2016 (with wiring diagrams) + 2020 (without)
  • COMANDDownloadManager 2.0.0.3 login: DLM password: DLM
  • HTTwin на Hyper-V password: 111
  • FDOK
  • MBSeedKey + DLLs 2020
  • Seed Calculator + DLLs 2020
  • DisassembyAssistant
  • Regio ECU 09.2014
  • VGSNAG2 Manager v1.6
  • SDmedia
  • Vediamo and DTS Monaco manuals

[Image: 78ad0af9046136bcef46cfc240fbecc0.jpg]
[Image: 8c0a012facb7e902de5b4470dae7c673.jpg]

RE: Xentry OpenShell HHT DAS SCN WIS EPC Starfinder Vediamo Monaco - Acronis - Aleksey-MS - 30-01-2020

(29-01-2020, 22:48)etb202 Wrote: PASSWORD?


Are you click buttons Rep (Reputation) + Thanks on the thread?

RE: Xentry OpenShell HHT DAS SCN WIS EPC Starfinder Vediamo Monaco - Acronis 2020 - Aleksey-MS - 06-04-2020

There are new updates for Acronis image - Xentry OpenShell HHT DAS SCN WIS EPC Starfinder Vediamo Monaco - 2020

RE: Xentry OpenShell HHT DAS SCN WIS EPC Starfinder Vediamo Monaco - Acronis 2020 - derdigga - 09-04-2020

does this work with VCI C6 OEM ? Ty!

RE: Xentry OpenShell HHT DAS SCN WIS EPC Starfinder Vediamo Monaco - Acronis 2020 - Aleksey-MS - 10-04-2020

(09-04-2020, 11:29)derdigga Wrote: does this work with VCI C6 OEM ? Ty!

Yes, will work.

RE: Xentry OpenShell HHT DAS SCN WIS EPC Starfinder Vediamo Monaco - Acronis 2020 - derdigga - 10-04-2020

(10-04-2020, 06:46)Aleksey-MS Wrote:
(09-04-2020, 11:29)derdigga Wrote: does this work with VCI C6 OEM ? Ty!

Yes, will work.

i used the 03.2020 Xentry Openshell and Pass thru version.

I can't get it to establish a connection between my VCI6, when i plug the VCI in i can hear that a device is connected(audio wise) and see that a device called "usb2lan" is installed and connected, but when I try to use the config program from xentry it fails to find the device.
Am i missing a step?

TY!

Thankyou

RE: Xentry OpenShell HHT DAS SCN WIS EPC Starfinder Vediamo Monaco - Acronis 2020 - Aleksey-MS - 11-04-2020

(10-04-2020, 10:56)derdigga Wrote:
(10-04-2020, 06:46)Aleksey-MS Wrote:
(09-04-2020, 11:29)derdigga Wrote: does this work with VCI C6 OEM ? Ty!

Yes, will work.

i used the 03.2020 Xentry Openshell and Pass thru version.

I can't get it to establish a connection between my VCI6, when i plug the VCI in i can hear that a device is connected(audio wise) and see that a device called "usb2lan" is installed and connected, but when I try to use the config program from xentry it fails to find the device.
Am i missing a step?

TY!

Thankyou


I can’t say, I need to connect and watch.

RE: Xentry OpenShell HHT DAS SCN WIS EPC Starfinder Vediamo Monaco - Acronis 2020 - Aleksey-MS - 28-04-2020

I added instruction - How to change the language for ConfigAssist and SD Connect

RE: Xentry OpenShell HHT DAS SCN WIS EPC Starfinder Vediamo Monaco - Acronis 06.2020 - Aleksey-MS - 17-06-2020

There are new updates. What's new:

Xentry OpenShell full 06.2020
DTS Monaco projects 2019
WIS 04.2020
Manuals for Vediamo + Monaco.

RE: Xentry OpenShell HHT DAS SCN WIS EPC Starfinder Vediamo Monaco - Acronis 06.2020 - fajtaj - 12-07-2020

incorrect partition table. that what i got after restore that image

(26-12-2019, 08:40)Aleksey-MS Wrote: Xentry OpenShell HHT DAS SCN WIS EPC Starfinder Vediamo Monaco - Acronis 06.2020

Image size 164 Gb after install on PC 214 Gb.

Computer requirements:
  • HDD or SDD > 240 Gb
  • RAM 4 Gb
  • Processor with support for virtualization technology (enable virtualization in BIOS).
Acronis image with Windows 10 x64 Rus (by default) + English.
Image of programs for the diagnosis, coding, and programming of cars of the Mercedes-Benz concern.
This image contains all the software from various sources, including activators.
The image is fully configured and working. Checked at 15 car services.
The image contains everything you need to activate and configure yourself.
The software package is already configured for MB Star C4 (Mercedes Star Diagnosis Compact 4).

Programs in the image:
  • Xentry OpenShell full 06.2020
  • DAS SCN offline coding (SDFlash 07.2018)
  • Vediamo 05.01.01
  • DTS Monaco 8.14.016 + projects 2019
  • EPC 11.2018
  • WIS 04.2020
  • StarFinder 2016
  • HTTWin on Hyper-V password: 111
  • Fdok
  • Manuals for Vediamo + Monaco.
Current updates:
  • Xentry
  • WIS
  • Manuals and projects.
Previous updates:
  • firmware database for Vediamo and Monaco
  • HHTWin configured for truck and bus diagnostics
  • configured DAS Standalone, there is a shortcut
  • there is a shortcut to launch HHTWin directly
  • configured to work without errors Xentry Update Service - XUS, which includes more than 64 thousand factory firmware that can be downloaded for free upon request by clicking on the button in the program
  • Xentry update data is downloaded automatically without errors
  • DAS offline SCN is not applied since this assembly under the online flash folder needs to be renamed before applying the patch
  • there are Xentry patcher and blacklist, except the long key
  • DTS Monaco configured interface for SDconnect
  • the base of patches and activators for setting up and activating all programs with your own hands for free!
If the error 2221-45 appears on the screen when starting Xentry, then in the path C: \ Program Files (x86) \ Mercedes-Benz \ xentry \ fusoko \ eclipse \ plugins delete the file com.daimler.xentry.diagservice_1.8.x. xxxxxxxxxx



Need it? Push buttons Rate (Reputation) and Thanks, PM for pass.