+- AutoProfessionals (https://www.autoprofessionals.org)
+-- Forum: Auto-Professionals Cars Forums (https://www.autoprofessionals.org/forumdisplay.php?fid=9)
+--- Forum: Vehicles Problems & General Discussions (https://www.autoprofessionals.org/forumdisplay.php?fid=76)
+---- Forum: Mercedes Benz (https://www.autoprofessionals.org/forumdisplay.php?fid=93)
+---- Thread: vediamo c3 mux config ? (/showthread.php?tid=4228)
vediamo c3 mux config ? - Cryjack - 11-03-2016
hi, i have installed a star diagnostic system with C3 mux.
Now i will use Vediamo 4.2..., ok i have installed, and change the com port.
But when i will connect with Vediamo it shows a problem with Ceasar driver .... not found ?
Which must changed ?
RE: vediamo c3 mux config ? - Marcos - 11-03-2016
(11-03-2016, 18:24)Cryjack Wrote: hi, i have installed a star diagnostic system with C3 mux.
Now i will use Vediamo 4.2..., ok i have installed, and change the com port.
But when i will connect with Vediamo it shows a problem with Ceasar driver .... not found ?
Which must changed ?
Change COM port to 1 or 2.
Vediamo by default comes with com port 1.
If you like to change it to work with com 2 you should modify "slave.ini" vediamo file.
RE: vediamo c3 mux config ? - Cryjack - 11-03-2016
com port is config but ceasar no initi....
RE: vediamo c3 mux config ? - Marcos - 11-03-2016
(11-03-2016, 20:30)Cryjack Wrote: com port is config but ceasar no initi....
TeamViewer ?
RE: vediamo c3 mux config ? - Pingpong - 09-04-2016
Have you pressed update in the Caesar panel ?
It should detect your MUX & you should see your serial no'
Well, it did for me when I remembered to select COM1
