+- AutoProfessionals (https://www.autoprofessionals.org)
+-- Forum: Auto-Professionals Cars Forums (https://www.autoprofessionals.org/forumdisplay.php?fid=9)
+--- Forum: Car Automotive Software - Automotive Workshop Manuals - Catalogue - General - Others (https://www.autoprofessionals.org/forumdisplay.php?fid=43)
+---- Forum: Mercedes Benz - Smart (https://www.autoprofessionals.org/forumdisplay.php?fid=62)
+---- Thread: Vediamo 05.00.05 dont work with SDconnect! *HELP* (/showthread.php?tid=3361)
Pages:
1
2
Vediamo 05.00.05 dont work with SDconnect! *HELP* - beligold - 28-11-2015
Hi everybody,
i have the following problem with vediamo...
CAESAR: ComCoordinator: 01025: PDUAPI: 0x0102 PDU_ERR_EVT_TESTER...ect.
My MUX is a C4 SDCONNECT with Xentry/DAS 2015.09
Vediamo has connection with MUX but not with the control unit! (KI211..or other)
Can someone help me???
Best Regards from Germany.. Beli
PS: sry for my bad englisch
RE: Vediamo 05.00.05 dont work with SDconnect! *HELP* - beligold - 09-12-2015
NO HELP FOR ME? German people here??
RE: Vediamo 05.00.05 dont work with SDconnect! *HELP* - laconic - 09-12-2015
You may have chosen the wrong CBF!
RE: Vediamo 05.00.05 dont work with SDconnect! *HELP* - beligold - 17-12-2015
(09-12-2015, 21:00)laconic Wrote: You may have chosen the wrong CBF!
Hi Laconic,
I have used the data from DAS!
No matter what I use the error is the same.
"Fehler: Steuergerät nicht initialisierbar (Reizung fehlgeschlagen). Ursache: CAESAR:ComCoordinator: 01025: PDUAPI: 0x0101 PDU_ERR_EVT_TX_ERROR"
the problem is not to solve ?
RE: Vediamo 05.00.05 dont work with SDconnect! *HELP* - beligold - 20-12-2015
look the picture plssss
RE: Vediamo 05.00.05 dont work with SDconnect! *HELP* - beligold - 21-12-2015
thnx for "help" ... Bravo
RE: Vediamo 05.00.05 dont work with SDconnect! *HELP* - Schmidti - 23-12-2015
Are you German? Me too, i think its easier for us to talk german, probably in pm.....
RE: Vediamo 05.00.05 dont work with SDconnect! *HELP* - AdyRab - 24-12-2015
i have the same problem are you solve it ??gruß
RE: Vediamo 05.00.05 dont work with SDconnect! *HELP* - Henry - 24-12-2015
I have the same problem, no connection to KI211 from DAS with vediamo+SD4, Grüße aus Germany
RE: Vediamo 05.00.05 dont work with SDconnect! *HELP* - beligold - 28-12-2015
hi... the MUX must be updatet to use with vediamo.
now its work perfekt :)