+- AutoProfessionals (https://www.autoprofessionals.org)
+-- Forum: Auto-Professionals Cars Forums (https://www.autoprofessionals.org/forumdisplay.php?fid=9)
+--- Forum: Vehicles Problems & General Discussions (https://www.autoprofessionals.org/forumdisplay.php?fid=76)
+---- Forum: Mercedes Benz (https://www.autoprofessionals.org/forumdisplay.php?fid=93)
+---- Thread: Vediamo help (/showthread.php?tid=2775)
Vediamo help - wurstinge - 12-09-2015
Hello
maybe someone can help me of you.
have at Vediamo5.0.5 this error message which can be seen in the picture.
can not get into the SAM H and Sam F .....
Furthermore, no short test works.
System: SD Connect and Xentry 03/15 and Vediamo 5.0.5
Vehicle w204 from the Year 2012 Design.
Thanks in advance
Hello
have found the error. now works super. only the quick not yet tested.
thx
RE: Vediamo help - superjet - 17-09-2015
please select HSCAN_UDS500
RE: Vediamo help - wurstinge - 19-09-2015
(17-09-2015, 05:32)superjet Wrote: please select HSCAN_UDS500
thx
RE: Vediamo help - beligold - 28-11-2015
hi, where can i set it?
thx
edit: on my vediamo i dont found hscan_uds500 only HSCAN_KW2C3PE_500
?????
RE: Vediamo help - beligold - 09-12-2015
NO HELP FOR ME?? German people here??
RE: Vediamo help - Steinbock - 10-03-2016
If you still need help you can contact me :)
As far as I know short test in Vediamo is nor working. At least I cannot get it to work.
RE: Vediamo help - smart - 19-06-2016
Hi all,
I have a question about Vediamo. it is possible that the program will work with the interface of softing can card 2 or other similar interface?
Br,
RE: Vediamo help - carstudy - 19-06-2016
(19-06-2016, 08:27)smart Wrote: Hi all,
I have a question about Vediamo. it is possible that the program will work with the interface of softing can card 2 or other similar interface?
Br,
There is a manual in the forum
please refer.
Also manual can be viewed and install