AutoProfessionals
xentry issue or car issue? - Printable Version

+- AutoProfessionals (https://www.autoprofessionals.org)
+-- Forum: Auto-Professionals Cars Forums (https://www.autoprofessionals.org/forumdisplay.php?fid=9)
+--- Forum: Vehicles Problems & General Discussions (https://www.autoprofessionals.org/forumdisplay.php?fid=76)
+---- Forum: Mercedes Benz (https://www.autoprofessionals.org/forumdisplay.php?fid=93)
+---- Thread: xentry issue or car issue? (/showthread.php?tid=12672)

xentry issue or car issue? - bladest - 31-08-2024

Hi i got fresh xentry year 2024 06 , its so fresh,
i am using bosch 6531 mts,
with can fd and doip baby.
it can read car no issues, i can clear codes no issues..
when i start my xentry i got this issue,
please see attached photo bellow.

also car had ad blue system and ad blue errors,
when i try to clear them they come back when i try to reset ad blue it cant... can the issue be my bosch since its passthru or car that have too many issues or my xentry version i got no clue car in question is cls 350 engine cdi, year 2016.
    1st photo xentry issue when i start it message it doesnt matter what car is...     2nd picture is when i try to make clearing reset procedure on special functions on ad blue special funcions on xentry,  and last photo is what issues car have with ad blue i am using only xentry no vediamo or monaco.    

RE: xentry issue or car issue? - Ecmbuster - 01-09-2024

One more time and repeated many TIMES

Post the Year, Make, Model, Engine type, Transmission type.

Is this correct?
WDD2183261A171995
2001 Mercedes CLS 350 D

2001 Mercedes CLS.pdf
File Type: .pdf
Downloaded: 1 times
Size: 63.9 KB



Why do I have to do your work?

Why do I request screen captures with the application and links that were offered here for free. WHY?

If it is a 2001 Mercedes CLS 350 D according to the VIN, why is XENTRY used when DAS is supposed to be used?

XENTRY with an older model? Maybe DAS is the better option or you have a defective version of XENTRY.

What ever version XENTRY you have, must have the ability to include the J2534 Drivers.

Contact the seller for the correct procedure to have XENTRY recognize the Pass-Thru as the diagnostic interface.

If there is an error with AdBlue why not follow the faults?
P1BC300
P2BA9FD
P229E13
P13E400
   

Did you measure the AdBlue within the tank? Full / Empty / Garbage or contaminated / AdBlue Deleted?
Is the AdBlue garbage? Did you measure a sample of the AdBlue with a Refractometer?
hxxxs://jlbradshaw.ie/product/adblue-refractometer-kit/

Did you measure the NOx Sensor 2 for an open circuit, has it been tested?

When the defects are repaired, then the faults can be deleted and reset the CDI61 errors.

Is there a CDI61 flash update for AdBlue? I just finished a 2015 Mercedes GLK Bluetec update.

Pass-Thru is OK but prefer my SDconnect C4 DOIP with WiFi because it always tells the truth.

You're Welcome!

RE: xentry issue or car issue? - Ecmbuster - 01-09-2024

The Xentry Pass-Thru will never operate with older models with K and L lines.
Xentry Pass-Thru will only work on CANBUS models.

Test this:

Open Microsoft Notepad.

Copy and Paste from this screen all of the following:

@echo off
sc start "ConfigAssist Service"
cd C:\Program Files (x86)\Mercedes-Benz\Xentry\XD_MB\
start_Xentry.exe passthru
PAUSE
sc stop "ConfigAssist Service"
EXIT

Save the Notepad file as:

START_Xentry.bat

To the desktop

Now run START_Xentry.bat as Administrator

What ever you installed with what ever was patched is that those patches were intend to use on: C3, C4 ,C5, etc. Multiplexers.

The file: start_Xentry.exe passthru works with Xentry but DAS standalone does not work with Pass-Thru.

Test and report back

You're Welcome!

RE: xentry issue or car issue? - bladest - 01-09-2024

hello friend commrade car is year 2015
we are in war stories,
its not 90s or 2000, i am with passthru and cars after year 2004 , can you supply proper full xentry install and activation is there somewhere in the forum for free or at good price ?
i am having passthru version i got no c3 c4 c55 i got no multiplexer my version is passthru not multiplexer.

all of my xentry works with cars start from year 2004 until 2024 i can confirm, there is just annoying message on the screen.
i got only open port and bosch i got k and l lines can you check my pc, may be i got issues or something?

RE: xentry issue or car issue? - Ecmbuster - 01-09-2024

Follow the post above and the included images.
SelectPTDevice

   
   
   

And explain this model and VIN, maybe I am just blind or a Euro model is that different?
That is why it is requested: Year, Make, Model, Engine Type, Transmission Type.

   

You're Welcome!

RE: xentry issue or car issue? - W211 - 06-09-2024

(31-08-2024, 19:42)bladest Wrote: Hi i got fresh xentry year 2024 06 , its so fresh,
i am using bosch 6531 mts,
with can fd and doip baby.
it can read car no issues, i can clear codes no issues..
when i start my xentry i got this issue,
please see attached photo bellow.

also car had ad blue system and ad blue errors,
when i try to clear them they come back when i try to reset ad blue it cant... can the issue be my bosch since its passthru or car that have too many issues or my xentry version i got no clue car in question is cls 350 engine cdi, year 2016.
1st photo xentry issue when i start it message it doesnt matter what car is...  2nd picture is when i try to make clearing reset procedure on special functions on ad blue special funcions on xentry,  and last photo is what issues car have with ad blue i am using only xentry no vediamo or monaco.

Hi. Either car do not support the fuction you are using or xentry is missing the protocol to use to commuicate  with the fuction you are trying!

If you are trying to reset adblue by xentry than the adblue ecu is faulty. Also in some cases you need online access to do that by Xentry!

Regarding passthrue Interfaces I have noticed that they are limited. Not 100% But they do their work :)