Latest news: --- SUZUKI SDT-2_soft_2252009 --- TOYOTA Techstream V15.20.015 (08/2020) + Activation --- Mitsubishi MUT-III 20031-00 - Mega --- Rheingold 4.24.30 Standalone / BLP 4.24.31 --- Xentry OpenShell XDOS 09.2020 --- Request: FiatDucato2300Jtd_F1AE0481C_EDC15C6-7 Stage2 and EGR off --- Request: MazdaCx-5_HwSH01-188K1_SwSHY5-18881-L Stage1 and EGR off --- Request: Opel Combo 1.3 Mjet Z13Dt HW01246O204D-SW3422C167 Immo and EGR off --- need some help with daf --- DUSH-Book v7,9 SRS-BOOK v1.4 keygen --- Mitchell Car Dimensions --- PET2 Update 5700 Multilingual is availeble --- Free Tuning DPF EGR ADBLUE IMMO Solutions --- VmWare TRUCKS EPC --- BenzNinja Flashware Ultimate --- CARSOFTWARE 5.2 f9 --- Piwis 3 V38.200 Full Installation Acronis Image working with VAS 6154 availeble. --- Piwis 3 V38.400 Full Installation Acronis Image working with VAS 6154 availeble. --- ECU Flasher TOOL BY ( ALEX ) [ORIGINAL] - ( www.ecuflash.ru ) --- ECFG for BCH ---
  
Thank You For Your Registration AP Forum!!! We Wish You A Good Time AutoProfessionals.Org Forum!!!

Attention! Don’t Wait For Your Registration Code You EMAIL.. Your Account Will Be Activated Automatically Within 15 Minutes FREE.. Please Stay With Us And Go To The Forum. "you Acaunt"





Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DO NOT BUY or use Nissan Consult III + chinese clone!
#1
Nissan 
MThis is to warn everyone who decide to buy Chinese clone of NISSAN CONSULT III Plus tool.
I purchased the tool from this seller www... and it has caused several damage to the car when the tool was connected to the car - ECM and BCM modules died  Angry
I have to add that I used to work with genuine Nissan Consult III Plus software quite frequently so it's not caused by lack of knowledge!!!


Chinese clone also did not work as genuine NISSAN tool. It could not detect car VIN, communication was dropping most of the time, etc. etc...


Stay away of Chinese crap if you like your car..
Reply
#2
why would you buy it when genuine is less money :(
Reply
Thanks given by:
#3
(08-26-2015, 12:52 AM)WildCard Wrote:  why would you buy it when genuine is less money :(

The Consult 3 is cheap but outdated. He is talking about the Consult 3 Plus. It's about 5 grand. You need to buy everything. You can't buy just the VI. The Chinese want 1500 usd for one. This is why i don't own one yet. waiting for price drop.
Reply
Thanks given by:
#4
(09-22-2015, 12:54 PM)kevinx Wrote:  
(08-26-2015, 12:52 AM)WildCard Wrote:  why would you buy it when genuine is less money :(

The Consult 3 is cheap but outdated. He is talking about the Consult 3 Plus. It's about 5 grand. You need to buy everything. You can't buy just the VI. The Chinese want 1500 usd for one. This is why i don't own one yet. waiting for price drop.


You don't need to buy everything , what ever everything is , you can just buy the VI2 by is self.

china as you say want 1500 usd for a VI2 When Genuine is 1300usd with postage original from Nissan, I know I have some,
also passthru works just slower , hell if you know what your doing you can make the old VI work with Nissan consult 3 plus
Reply
Thanks given by:
#5
(10-05-2015, 07:37 PM)WildCard Wrote:  
(09-22-2015, 12:54 PM)kevinx Wrote:  
(08-26-2015, 12:52 AM)WildCard Wrote:  why would you buy it when genuine is less money :(

The Consult 3 is cheap but outdated. He is talking about the Consult 3 Plus. It's about 5 grand. You need to buy everything. You can't buy just the VI. The Chinese want 1500 usd for one. This is why i don't own one yet. waiting for price drop.


You don't need to buy everything , what ever everything is , you can just buy the VI2 by is self.

china as you say want 1500 usd for a VI2 When Genuine is 1300usd with postage original from Nissan, I know I have some,
also passthru works just slower , hell if you know what your doing you can make the old VI work with Nissan consult 3 plus

I guess i don't know. How do you get the Consult 3 VI to work with Consult 3+ software? will it work with all cars?
Reply
Thanks given by:
#6
(10-06-2015, 02:25 PM)kevinx Wrote:  
(10-05-2015, 07:37 PM)WildCard Wrote:  
(09-22-2015, 12:54 PM)kevinx Wrote:  
(08-26-2015, 12:52 AM)WildCard Wrote:  why would you buy it when genuine is less money :(

The Consult 3 is cheap but outdated. He is talking about the Consult 3 Plus. It's about 5 grand. You need to buy everything. You can't buy just the VI. The Chinese want 1500 usd for one. This is why i don't own one yet. waiting for price drop.


You don't need to buy everything , what ever everything is , you can just buy the VI2 by is self.

china as you say want 1500 usd for a VI2 When Genuine is 1300usd with postage original from Nissan, I know I have some,
also passthru works just slower , hell if you know what your doing you can make the old VI work with Nissan consult 3 plus

I guess i don't know. How do you get the Consult 3 VI to work with Consult 3+ software? will it work with all cars?


easy way is to install consult 3 and then consult 3 plus on same machine , consult 3 you have to go to the j2534 manager and a couple of other .exe files and right click , run for XP and run as admin if using Windows 7
you might have a problem installing the drivers though, so in the drivers folder you going to use you should just right click the .ini file and install it then connect the VI

Any way the real trick to getting most j2534 working with consult 3 plus is take some files from NERS and replace in consult 3 plus as well as the diagnostictool.ini editing.
Reply
Thanks given by:
#7
(10-06-2015, 04:34 PM)WildCard Wrote:  
(10-06-2015, 02:25 PM)kevinx Wrote:  
(10-05-2015, 07:37 PM)WildCard Wrote:  
(09-22-2015, 12:54 PM)kevinx Wrote:  
(08-26-2015, 12:52 AM)WildCard Wrote:  why would you buy it when genuine is less money :(

The Consult 3 is cheap but outdated. He is talking about the Consult 3 Plus. It's about 5 grand. You need to buy everything. You can't buy just the VI. The Chinese want 1500 usd for one. This is why i don't own one yet. waiting for price drop.


You don't need to buy everything , what ever everything is , you can just buy the VI2 by is self.

china as you say want 1500 usd for a VI2 When Genuine is 1300usd with postage original from Nissan, I know I have some,
also passthru works just slower , hell if you know what your doing you can make the old VI work with Nissan consult 3 plus

I guess i don't know. How do you get the Consult 3 VI to work with Consult 3+ software? will it work with all cars?


easy way is to install consult 3 and then consult 3 plus on same machine , consult 3 you have to go to the j2534 manager and a couple of other .exe files and right click , run for XP and run as admin if using Windows 7
you might have a problem installing the drivers though, so in the drivers folder you going to use you should just right click the .ini file and install it then connect the VI

Any way the real trick to getting most j2534 working with consult 3 plus is take some files from NERS and replace in consult 3 plus as well as the diagnostictool.ini editing.

Can you like make an exact way to install? Saying: consult 3 you have to go to the j2534 manager and a couple of other .exe files and right click
What other exe files?
Reply
Thanks given by:
#8
(10-06-2015, 05:29 PM)kevinx Wrote:  
(10-06-2015, 04:34 PM)WildCard Wrote:  
(10-06-2015, 02:25 PM)kevinx Wrote:  
(10-05-2015, 07:37 PM)WildCard Wrote:  
(09-22-2015, 12:54 PM)kevinx Wrote:  The Consult 3 is cheap but outdated. He is talking about the Consult 3 Plus. It's about 5 grand. You need to buy everything. You can't buy just the VI. The Chinese want 1500 usd for one. This is why i don't own one yet. waiting for price drop.


You don't need to buy everything , what ever everything is , you can just buy the VI2 by is self.

china as you say want 1500 usd for a VI2 When Genuine is 1300usd with postage original from Nissan, I know I have some,
also passthru works just slower , hell if you know what your doing you can make the old VI work with Nissan consult 3 plus

I guess i don't know. How do you get the Consult 3 VI to work with Consult 3+ software? will it work with all cars?


easy way is to install consult 3 and then consult 3 plus on same machine , consult 3 you have to go to the j2534 manager and a couple of other .exe files and right click , run for XP and run as admin if using Windows 7
you might have a problem installing the drivers though, so in the drivers folder you going to use you should just right click the .ini file and install it then connect the VI

Any way the real trick to getting most j2534 working with consult 3 plus is take some files from NERS and replace in consult 3 plus as well as the diagnostictool.ini editing.

Can you like make an exact way to install? Saying: consult 3 you have to go to the j2534 manager and a couple of other .exe files and right click
What other exe files?


Not really got the motivation right now and its a bit hard to tell you which files without reinstalling it all again and my times taken up with other stuff at the moment .
Reply
Thanks given by:
#9
Thats ok. I see you only need to modify the Diagnostic Tool ini file. Thanks anyway
Reply
Thanks given by:
#10
(10-07-2015, 02:47 AM)kevinx Wrote:  Thats ok. I see you only need to modify the Diagnostic Tool ini file. Thanks anyway

Crack on then , im sure that's not all you need to get the vi working good with consult 3 plus, 100% sure
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 1 Guest(s)